DEUTZ 912 CYLINDERS
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
I made a arch out of alu rod and then welded it in.
Jiffy Lube doesn't know waht 7 ft lbs is.....
Don
Jiffy Lube doesn't know waht 7 ft lbs is.....
Don
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
-
- Posts: 260
- Joined: Mon Dec 28, 2009 11:05 pm
Re: DEUTZ 912 CYLINDERS
Got the prices today !
60euros per new 912 mahle liner lol. I told they guy i only needed four .
I then priced out mahle 1.7 cylinder and it was 120euros each , lol.
I am dreaming about a short stroke 100 mm or 101.6 . Is that possible?
60euros per new 912 mahle liner lol. I told they guy i only needed four .
I then priced out mahle 1.7 cylinder and it was 120euros each , lol.
I am dreaming about a short stroke 100 mm or 101.6 . Is that possible?
My welding sucks .
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
Make a nice drag engine.....
Don
Don
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
Need fuel rails to get this thing running!
80mm centers. Anyone know who sells/makes fuel rails?
Don
80mm centers. Anyone know who sells/makes fuel rails?
Don
You do not have the required permissions to view the files attached to this post.
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
-
- Posts: 7404
- Joined: Sat Mar 10, 2001 12:01 am
Re: DEUTZ 912 CYLINDERS
I think you can manage making your own. After all, you made your own cylinders! Fuel rails are basic fab work compared to what you have accomplished already!
The extrusion is available on ebay. I have borrowed Supaninja's Ross Machine drill bit that does the machining in one step. It can be done with basic tools and the special bit isn't required.
http://www.supraforums.com/forum/showth ... l-rail-%29
http://www.sdsefi.com/techrail.htm
http://www.mr2.com/forums/turbo-engine- ... -rail.html
The extrusion is available on ebay. I have borrowed Supaninja's Ross Machine drill bit that does the machining in one step. It can be done with basic tools and the special bit isn't required.
http://www.supraforums.com/forum/showth ... l-rail-%29
http://www.sdsefi.com/techrail.htm
http://www.mr2.com/forums/turbo-engine- ... -rail.html
Steve
My Baja Build
My Baja Build
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
PR tube extenders.....
One down, 7 to go!
Don
One down, 7 to go!
Don
You do not have the required permissions to view the files attached to this post.
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
-
- Posts: 534
- Joined: Sun Oct 27, 2002 1:01 am
Re: DEUTZ 912 CYLINDERS
Cool idea! Looks great!
- CobraJet
- Posts: 430
- Joined: Sun Oct 31, 2010 11:12 pm
Re: DEUTZ 912 CYLINDERS
What rod lengths are you using Don?
How much wider did all of this make your engine?
BTW, what cooling shroud will you be using?
How much wider did all of this make your engine?
BTW, what cooling shroud will you be using?
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
5.7 Chevy length Porsche diameter rods, narrowed to Chevy width...
narrowing M300 rods is a BITHC!
Engine is 30.58mm wider...1.20" wider.
Cooling is waiting on testing....although I DO have some whimsical pics on
page 3 in this thread! I have 2 sand rails and they would do great (turned around)
in the 1/4 mile!
Don
narrowing M300 rods is a BITHC!
Engine is 30.58mm wider...1.20" wider.
Cooling is waiting on testing....although I DO have some whimsical pics on
page 3 in this thread! I have 2 sand rails and they would do great (turned around)
in the 1/4 mile!
Don
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
-
- Posts: 2433
- Joined: Wed Apr 13, 2011 1:01 pm
Re: DEUTZ 912 CYLINDERS
wasnt tempted to try some spring loaded PR tubes? or wouldnt they have made it either? beautiful machining though!
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
Actually I have silicone PR extenders for 80 cranks with stock rods:
But they only raise it 3/8ths inch!
Don
But they only raise it 3/8ths inch!
Don
You do not have the required permissions to view the files attached to this post.
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
-
- Posts: 260
- Joined: Mon Dec 28, 2009 11:05 pm
Re: DEUTZ 912 CYLINDERS
Drooooling
How much did you have to cut the spigots ? The look huge.
Is the stock size 100mm or am i wrong?
How much did you have to cut the spigots ? The look huge.
Is the stock size 100mm or am i wrong?
My welding sucks .
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
109mm.
Don
Don
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
- Type 4 Unleashed
- Moderator
- Posts: 2202
- Joined: Tue Nov 08, 2005 10:43 pm
Re: DEUTZ 912 CYLINDERS
What size exhaust are you going to run, specifically what size stub pipes ?
The PR extenders your making are good but can be a problem, because your going to run stock push rod tubes in them and stock tubes have a slight clearance issue with 1 1/2" stubs and get worse with larger ones.
I am running the 1 3/4" but I went special clearanced stroker tubes, which help from cooking the returning oil from the heads.
Get yours mocked up and see how they fit.
The PR extenders your making are good but can be a problem, because your going to run stock push rod tubes in them and stock tubes have a slight clearance issue with 1 1/2" stubs and get worse with larger ones.
I am running the 1 3/4" but I went special clearanced stroker tubes, which help from cooking the returning oil from the heads.
Get yours mocked up and see how they fit.
Richard
EMW
“Have you ever noticed how some people never
have the money to do it right, but can always
find the money to do it twice ?”
EMW
“Have you ever noticed how some people never
have the money to do it right, but can always
find the money to do it twice ?”
- dstar5000
- Posts: 4555
- Joined: Tue Feb 12, 2002 12:01 am
Re: DEUTZ 912 CYLINDERS
I made them to sit the PR tubes higher than stock and give EXTRA clearance....also
gives extra spring pressure.....
Finished!
I will install the PRs and tubes tomorrow and the dual Dell 45s to check for leaks and
make sure everything is kosher before going to the next step and installing the CB Performance
Competition Fuel injection system.
Mistakes will be made.....in the trash!
Don
gives extra spring pressure.....
Finished!
I will install the PRs and tubes tomorrow and the dual Dell 45s to check for leaks and
make sure everything is kosher before going to the next step and installing the CB Performance
Competition Fuel injection system.
Mistakes will be made.....in the trash!
Don
You do not have the required permissions to view the files attached to this post.
"Let me say it as simply as I can: transparency and the rule of law will be the touchstones
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....
of this presidency,".. Barack Obama January 21, 2009, 30 minutes before he signed the law
sealing all his personal information....