Page 4 of 4

Re: Need info: T127 engine

Posted: Fri Aug 01, 2014 7:57 am
by Humby
Here's a picture of the carb jets.

Image

As you can see the venturi size is 28
Jets from left to right: 145, 050 and 105.

I also think that they were rebuild, or checked, because the upper gasket is one for a PDSIT 32-34 ...

Not sure if I will use the original carbs on this 127 engine, or 36IDF Webers...

Aircooled greetz,

Humby

Re: Need info: T127 engine

Posted: Sun Aug 03, 2014 2:25 pm
by dawie
Thanks for the info. Any idea what size the main jet is?

Re: Need info: T127 engine

Posted: Sun Aug 03, 2014 10:44 pm
by Tony Z
Dawie
Call me and you can have a look at mine as closely as you like

Re: Need info: T127 engine

Posted: Sat Oct 08, 2016 5:59 pm
by vanapplebomb
Anyone have any idea what kind of cam profiles the 1600 and 1700 127V engines ran in the supper vee class?

Re: Need info: T127 engine

Posted: Thu Aug 13, 2020 1:08 pm
by pablovent
Hi there,

Reliving this old post, about the T127 1.8, information, cam specs? ...
Unfortunately some post photos and archives cannot be seen....lol

Thanks

Re: Need info: T127 engine

Posted: Thu Aug 13, 2020 3:05 pm
by Tony Z
I'm happy to send my photos to someone who can host them and post them to this thread

Re: Need info: T127 engine

Posted: Thu Aug 13, 2020 3:13 pm
by pablovent
Great!!.........[email protected]

Re: Need info: T127 engine

Posted: Mon Jun 21, 2021 11:02 pm
by Pidget
I reposted my photos in the thread.

Re: Need info: T127 engine

Posted: Sat Feb 12, 2022 2:50 am
by Cera
Hi there.

I discovered this forum and thread by accident, I'm doing conversion build of my VW and I just pulled one of these T127 engines out from my bus. :P

Image

Image

Image

Long story available in: https://openinverter.org/forum/viewtopi ... =11&t=2251

But brief history is that my granddad (who owned the bus) got it as a replacement from German military when the original Typ1 engine broke down in the bus. He boasted it was "brand new" and they tried to do the engine swap but this has 24V electrics, EMF shielded spark leads and all kinds of weirdness which apparently halted the effort in the end. Eventually old age and the scale of the repairs left the project standing and my granddad gifted the bus to me.

I have zero interest in this Type4 nor is it part of the bus's history in my eyes. I have the original Typ1 that belonged there which I plan to keep as a relic, as well as my crazy plans for going electric. :D

Buuut as a woman with eye for preserving history. This seems to be rare engine? Is there actually people who'd like to have it before I sell it as just another Typ4 and someone cluelessly strips it down and scraps what's not working? :P How much should I ask for it in this condition?

I live in Finland so logistics might prove to be a slight issue for people in this forum though...

Re: Need info: T127 engine

Posted: Thu Feb 17, 2022 9:50 am
by '77 Westy
Nice story and a nice project. I’ve just read your conversion build thread, a comment on the weight, a T2 is heavier than you think, gross weight of a Kombi is 2,300kg. 1,300kg on the rear axle.