Project---Split cable pull linkage

[Steve Arndt]

Are you going to sell them yourself?

[The Fix]

Looks great Pete mine is working flawlessly. I have only adjusted it twice since I installed it.

[trapnm]

Pete. I will take one in black. Need it for a bus so a longer cable would be great.nice to see you back.

[Passatman]

Well if pete starts doing the links for himself for a good price i will surely buy one. By the way Pete how much is for one.

[Steve Arndt]

He posted more details in the samba post.

[slowtwitch]

Well if pete starts doing the links for himself for a good price i will surely buy one. By the way Pete how much is for one.

The system is $300.00, plus shipping. The price includes the powdercoating in any color of your choice..as long as it's black If you want a custom color, it will be few dollars more.

thanks

[vwjim]

[56T4]

Been running Pete's linkage for about 18 months now,Best linkage on the market by a long way.And it looks soooo sexy

[slowtwitch]

Been running Pete's linkage for about 18 months now,Best linkage on the market by a long way.And it looks soooo sexy

Good to hear...thanks

[DaveB]

Will be posting my set FS in the forums shortly. Set that came with the acorn nut for the carbs

[Manny]

Pete, anyone who has installed this.
How much clearance is needed between the carbs and the cooling shroud?
Both my Dells touch the shroud.
Bug
2056
Dell 40's DRLA
DTM-V2
Hex bar.
I'm thinking of a couple of those hard spacers between the cylinder heads and the base of the intake manifolds. (if I can find some)
Probably have to use longer studs on the heads
I'm kind of tired of adjusting the idle every time I drive the Bug.
Manny

[slowtwitch]

Pete, anyone who has installed this.
How much clearance is needed between the carbs and the cooling shroud?
Both my Dells touch the shroud.
Bug
2056
Dell 40's DRLA
DTM-V2
Hex bar.
I'm thinking of a couple of those hard spacers between the cylinder heads and the base of the intake manifolds. (if I can find some)
Probably have to use longer studs on the heads
I'm kind of tired of adjusting the idle every time I drive the Bug.
Manny

Manny, give me a measurement from center of a manifold bolt to the shroud. I'll see what I have

[Manny]

I measure 15mm or 9/16"
That is the best I can see here, both sides are the same.
I took pictures but being a low tech old guy, don't know how to attach.

[Manny]

Pete, yes or yes.
Manny

[slowtwitch]

Pete, yes or yes.
Manny

Manny, The best I could go is .625 in that measurement with the material I use. I would have to do a complete redesign of the bracket to fit your setup and that would take a bit of time.... which is in short supply right know.